AutopStenhoj Maestro 30 Series 2 Post Lift

AutopStenhoj Maestro 30 Series 3 Tonne 2 Post Lift
The AUTOPSTENHOJ Maestro 30 Series of electro-mechanically operated vehicle lifts have a lifting capacity of 3 tonnes. These two post lifts, which are baseless, have an overhead portal which can also be recessed in the ground between the posts (optional kit required).
These lifts are ideal for most makes and models of cars with a minimum pad height of just 95mm! The design of the lifting posts (asymmetric configuration) makes these lifts ideal for small garage workshops and also makes opening the vehicle door easier.
This lift is also approved by Volkswagen Group.
Three models are available in this series :
- 088101 AUTOPSTENHOJ Maestro 30 F two post lift with F type pads
- 088301 AUTOPSTENHOJ Maestro 30 CF two post lift with CF type pads
- 088201 AUTOPSTENHOJ Maestro 30 CF-08 two post lift with CF-08 type pads
ALL AUTOPSTENHOJ two post lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
AUTOPSTENHOJ Lifts are manufactured in Denmark
Technical Specification
Lifting capacity | 3000kg |
Lifting / lowering time | 40 seconds / 40 seconds |
Minimum height | 95mm |
Maximum height | 1995mm – 2025mm (f) / 1995mm – 2155mm (cf) / 1995-2150mm (cf-08) |
Front minimum / maximum arm length | 540mm / 850mm (f) 580mm / 885mm (cf) 555mm / 840 (cf-08) |
Rear minimum / maximum arm length | 900mm / 1425mm (f) 930mm / 1425mm (cf) 920mm / 1415mm (cf-08) |
Motor size | 1.5kw x 2 |
Power Requirements | 3 phase – 16a Isolator Required |
Operation | Electro-mechanical |
Call us now on 01823 328530 for more details