Shopping Cart

Log in / Register

True Code

True Code Interface

True Code

True Code is a PC based software package with interface and OBD connection that specialises in programming vehicle remotes, keys and cards, and reads the security pincodes on a selected range of vehicles.

The software will communicate with the vehicle via the OBD socket, extract and reveal the security pincode and enable keys and remotes to be cleared or added to the memory. Simply click on program and it will prompt you through the programming sequence quickly and accurately.

TCS Main Interface

The main interface for True Code. Just purchase TCS cable and then add the modules you require from the list below.

Only £345.00 + VAT
QTY :
P/No. : tcs

Models Covered by GMTC1

  • Astra-H (2004-2009)
  • Astra-J (2009-2015)
  • Corsa-D (2006-2014)
  • Insignia (2008-2015)
  • Signum (2003-2008)
  • Vectra-C (2002-2008)
  • Zafira-B (2005-2014)

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : gmtc1

Models Covered by Renault RTC 1

  • Clio II
  • Laguna II Ph1
  • Espace IV Ph1
  • Kangoo Ph2
  • Master Ph1 / Ph2
  • Scenic II Ph1 / Ph2
  • Megane II Ph1 / Ph2
  • Traffic II Ph1 / Ph2
  • Vel Satis Ph1

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : rtc1

Models Covered by Renault RTC 2

Allows you to extract the dealer pincode, and program keys into the vehicle for:

  • Renault Clio III (mechanical key)
  • Modus
  • Twingo

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : rtc2

Models Covered by Renault RTC 3

This software connects to vehicle, obtains pincode and allows programming of the following.

  • Clio II Campus (2006>)
  • Clio II Symbol
  • Dacia Logan / Sandero <10
  • Espace IV ph1 >06 (2 button)
  • Espace IV ph1 >06 (3 button)
  • Laguna II ph2 >06 (2 button)
  • Laguna II ph2 >06 (3 button)
  • Vel Satis >06 (2 button)
  • Vel Satis >06 (3 button)

Also, since the Campus UCH software runs with the older Clio, when it has been replaced due to being faulty, you will now be able to obtain the correct pin for those models that previously failed.

For European/Africa/S.America customers the Clio Symbol and Dacia option should also complete all the Clio models for those markets.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : rtc3

Models Covered by Renault RTC 4

This software automatically, and very quickly, determines the pincode and will then allow you to program the keys or cards to the vehicle in one very simple procedure.

  • Renault Kangoo II 2008>
  • Renault Master III 2010>
  • Movano and Nissan NV400 2010>
  • Renault Clio III with card key system (2005 - 2012)

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : rtc4

Models Covered by Renault RTC 5

This latest software update instantly retrieves the pincode and allows the user to then program cards into the vehicle.

  • Renault Laguna III
  • Renault Megane III 2008-2011
  • Renault Megane Scenic III 2008-2011

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : rtc5

REE1 Eeprom Software (Renault)

This software enables the read/write of a variety of UCH modules via the OBD socket.

Vehicles covered:

  • Renault Clio II (2001 to 2008)
  • Renault Kangoo (2003 to 2008)
  • Renault Laguna II (2001 to 2007)
  • Renault Trafic (2002 to 2013)
  • Renault Master (2003 to 2010)

This new software module will allow you to read, and also write, the contents of the EEPROM of various UCH modules fitted to these vehicles through the OBD socket. This will allow you to program virgin files to second hand modules in order to make them able to be used again. Or you can use it to clone the information from one UCH and program it to the next.

Only £150.00 + VAT
QTY :
P/No. : ree1

Renault Special Kit

Purchase the TCS, RTC1, RTC2, RTC3, RTC4, RTC5 and REE1in one complete Renault package.

Only £1045.00 + VAT
QTY :
P/No. : rtcren

Models Covered by Nissan NTC1

This is a software update to the TrueCode programming system that allows you to extract the dealer pincode, and program keys into the vehicle for:

  • Nissan Micra K12
  • Nissan Note E11
  • Nissan NV200

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : ntc

Models Covered by Nissan NTC2

  • 370z (euro model) (2008+) - prox key / mechanical
  • Cabstar (2006+) - mechanical key
  • Cube Z12 (2009+) - prox key
  • Juke F15 (2010-2015) - prox / mechanical
  • Leaf ZE0 (2010+) - prox key
  • Micra K13 (2011+) - prox key / mechanical
  • Navara D40 (2006+) - intelligent key / mechanical
  • Note E12 (2011+) - prox key / mechanical
  • Pathfinder R51 (2005-2012) - intelligent key / mechanical
  • Qashqai J10 (2007-2013) - intelligent key / mechanical
  • X-Trail T31 (2008+) - intelligent key / mechanical

Pincode retrieval is instant and automatic on all models up until 2013. NTC2 now detects if the vehicle is using the very newest 12 digit pin system. A prompt to enter the code from a sticker in the glovebox and TrueCode will then convert into the immobiliser code for you to be use to program keys – no dealer or third party intervention is needed.

Please Note : TCS Main Interface Required

Only £295.00 + VAT
QTY :
P/No. : ntc2

Models Covered by Ford FTC1

  • C-Max (2003-2010)
  • Cougar (1998-2002)
  • Fiesta (1998-2002) / Fiesta (2002-2008)
  • Focus (1998-2004) / Focus (2004-2011) non-prox
  • Fusion (2002-2011)
  • KA (1998-2000) / KA (2000-2008)
  • Mondeo (1998-2007)
  • Puma (1997-2001)
  • Transit (2000-2006)
  • Transit Connect (2002-2007) / Transit Connect (2007-2011)

All have incode/outcode security bypass enabled. No need for internet access - this software does all the calculations for you, seamlessly in the background. Updated to provide completely accurate incode/outcode calculation.

Additionally, there is a free stand-alone calculator for matching other electronic modules into Ford vehicles included with this module.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : ftc1

Models Covered by Ford FTC2

  • Fiesta Mk VII (2008>)*
  • Galaxy Mk III (2006>)*
  • Mondeo Mk IV (2007>)*
  • S-Max (2006>)*
  • Transit Mk VII (2006-2014)

Erase/program keys for all models utilising the mechanical, non-proximity key system up to when the new generation incode/outcode system was introduced on the model. No requirement for an existing working key.

*The incode/outcode algorithm works for the vehicles that uses the ‘classic’ ford security algorithm. This changed in approx 2011 for some vehicles, later for others, so we cannot put an end date on the coverage.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : ftc2

Models Covered by Ford FTC3

This software will program keys and remotes into the newer Ford vehicles that are equipped with the newer Ford security algorithm:

  • Focus 2011>
  • Fiesta 2013>
  • Cougar 2013>
  • Mondeo 2010>

Software will display the outcode and allow you to manually enter the incode.

The incode can be calculated with a third party OBD calculation device and then entered into this software to allow programming. To be added soon is the ability to use your own Ford dealer login details.

Some vehicles will require T2 Cable adaptor.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : ftc3

Models Covered by Ford FTC4

  • Edge 2016>
  • F150 2015
  • Galaxy 2015>
  • Mondeo 2015>
  • Mustang 2015>
  • Ranger 2016>

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : ftc4

Ford Special Kit

Purchase the TCS, FTC1, FTC2, FTC3 and FTC4 in one complete package.

Only £895.00 + VAT
QTY :
P/No. : rtcford

Models Covered by Suzuki STC1

This software connects to vehicle, obtains pincode and allows programming of the following:

  • Alto (2009-2013)**
  • Grand Vitara (2006-2010)
  • Splash (2008-2013) (also Vauxhall Agila B)
  • SX4 (2006-2010) - prox key / mechanical
  • Swift (2004-2010) - prox key / mechanical
  • Suzuki Manual Pin

For vehicles after 2009, Suzuki use a 20 digit outcode system - these will need to be converted by a third party supplier or software, or you can wait and the software will find the pincode in approximately 40 minutes. TrueCode automatically determines whether the vehicle has this system - prior to this date, pincode retrieval is automatic and instant.

** This will also program the Nissan Pixo that is based upon the same system.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : stc1

Models Covered by Suzuki STC2

This software connects to vehicle, obtains pincode and allows programming of the following:

  • Baleno 2014+
  • Celerio 2015+
  • Ciaz 2014+
  • Kizashi 2012+
  • S-Cross 2014+
  • Swift 2010-2014
  • SX4 2010+
  • Vitara SZT 2015+

Software programs keys into Suzuki systems that have 20 Byte ID, with 8 and 4 digit pincodes, automatically. Software programs both prox and non-prox ID47 keys.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : stc2

FATC1 Software for Fiat Punto 188 (1999-2006)*

Read pincode from petrol engine ECU type IAW59F (used in most popular 1.2 8V engine) with non-programmed key.

Read/Write Delphi BCM full EEPROM file. No working key required, just the pincode. If the vehicle is fitted with a different ECU you can obtain pincode from your usual supplier and still read the BCM file with that pin.

BCM EEPROM file is not encrypted by us and can be used in many transponder devices to create an ID48 ‘dealer key’ ready for programming. This file can also be used with some devices to create an ID48W that is ready for starting the vehicle, or the modified file can also be written to the BCM EEPROM through the OBD.

*Model continued production until 2010 in some EU markets.

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : fatc1

FATC2 Fiat Software

This software will program keys into the following vehicles:

  • 500
  • Bravo 198
  • Croma 194
  • Doblo 152
  • Ducato 250
  • Fiorino 225
  • Grande Punto 199
  • Qubo 300
  • Ford KA

Software will allow programming of keys, with manually entered pincode. The pincode can be readily obtained from your usual supplier.

This software module requires T5 cable adaptor.

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : fatc2

FATC3 Fiat Software

This software works with the following vehicles:

  • Fiat Punto (2006-2011) (Black BCM)
  • Fiat Punto (2011-2014) (Grey BCM)
  • Fiat 500 (2007-2011)
  • Fiat 500 (2011-2014)
  • Fiat Doblo (2010-2014)
  • Fiat Fiorino (<2014)
  • Citroen Nemo (<2014)
  • Peugeot Bipper (<2014)
  • Opel Combo (<2014)

Using FATC3, there is now no need to remove the BCM and read the EEPROM memory device  from these vehicles. All the necessary information required to obtain the pincode, and create a dealer key can be read via OBD, very easily, in just seconds, using TrueCode Smart.

FATC3  allows you to fully read the 93c86 EEPROM memory inside the BCM – all via the OBD socket in just 45s or so. The file is then saved to your PC. This is the exact same file you would get if you had opened the BCM and read the EEPROM manually. Only, this process  is completed in approximately 45s and carries no risk of damage to the device or your fingers.

You can then load this EEPROM file into Tango/Miraclone/TMPro2/ZedBull etc. etc.  in order to generate a  ‘dealer precoded’ standard or remote control key. In addition, you can also use this file to create a fully working standard key onto a TPX4 type transponder – with no further programming required. This is extremely useful for Fiat, due to the way that the key programming system permanently deletes unavailable keys. (Using that method, you can leave the existing keys still working in the case that the customer may find them again.)

Once you’ve precoded a key/remote, it can then be programmed into the vehicle via OBD, using our FATC2 software.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : fatc3

FATC4 Fiat Software

This software works with the following vehicles:

  • Alfa Romeo Mito
  • Citroen Relay 2012-2017
  • Peugeot Boxer 2012-2017
  • Fiat Ducato 2012-2017
  • Fiat Doblo 2013-2017
  • Fiat Punto 2012-2017
  • Fiat 500 2014-2017
  • Fiat 500L 2014-2017
  • Fiorino 2014-2017
  • Nemo 2014-2017
  • Bipper 2014-2017
  • Opel Combo 2014-2017
  • More vehicles to be confirmed...

This software module instantly retrieves the pincode and configuration data for the vehicle. It then allows you to save the key configuration data in the form of a special ‘skeleton file’ (*see below) in order to create a pre-coded ‘dealer’ key/remote control. The pre-coded key can then be easily programmed in using our FATC2 software.

*Skeleton file is a manipulated .bin file, a ‘fake’ EEPROM file that contains the relevant info from the car that you are working on. This file can be loaded into any of the leading transponder production devices, and will be recognised as a Fiat Punto 93c86 file. With your transponder production device, you can then choose to create an ID46w or to create a pre-coded key/remote key.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : fatc4

Fiat Special Kit

Purchase the FATC1, FATC2, FATC3, FATC4 and CVEE1 in one complete package.

Only £995.00 + VAT
QTY :
P/No. : fatckit

PSATC1 Peugeot / Citroen Software

Vehicle coverage for this module includes:

Peugeot

  • 1007 (2005+)
  • 207 (2006+)
  • 307 (2005+)
  • 308 (2007-13)
  • 3008 (2007+)
  • 407 (2004+)
  • 4008 (2012+)
  • 5008 (2009+)
  • 607 (2005+)
  • 807 (2006+)
  • Expert (2007+)

Citroen

  • C3 (2006+)
  • C3 Picasso (2008+)
  • C4 (2003+)
  • C4 Picasso (2007-12)
  • C5 (2005-07)
  • C6 (2005+)
  • DS3 (2010+)
  • Dispatch (2008+)
  • Jumpy (2008+)
  • Berlingo (2007+)

Software requires T4 adaptor cable.

Software will program keys and remotes into vehicle. Currently, pincode is entered manually by the user. Pincodes readily available from our Code Service.

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : psatc1

PSATC2 Peugeot / Citroen Software

Preliminary coverage list - may be expanded:

Peugeot

  • 208 (2012+)
  • 508 (2011+)

Citroen

  • DS4
  • DS5

Software programs keys in PSA vehicles with mechanical transponder key system. Prox systems to be added at no extra cost. Manually entered pincode.

Please Note : TCS Main Interface Required

Only £150.00 + VAT
QTY :
P/No. : psatc2

PSATC3 Peugeot / Citroen Software

This module will read pincodes from various PSA group vehicles, with or without a working key, from Valeo BSI units, in less than 30 seconds.

Only £150.00 + VAT
QTY :
P/No. : psatc3

MTC1 Mazda Software

  • Mazda 2 - 2004 - 2012
  • Mazda 3 - 2004 - 2012
  • Mazda 5 - 2004 - 2012
  • Mazda 6 - 2004 - 2012
  • Mazda RX-8
  • Mazda MX-5 - 2007 - 2012

Software will program both mechanical and proximity keys.

100% incode/outcode system.

Later system on Mazda 6 (2008+) will require adaptor cable T2. T2 cable will work with other TrueCode modules.

Please Note : TCS Main Interface Required

Only £225.00 + VAT
QTY :
P/No. : mtc1

LRTC1 Land Rover Software

This software programs proximity keys on:

  • Land Rover Discovery IV (2010+)
  • Land Rover Freelander II (2012+)
  • Range Rover Evoque
  • Range Rover (2010+)
  • Range Rover Sport (2010-2013)

Software will add and erase proximity keys. No requirement for a working prox key. Works in all prox lost scenario.

Security access is automatic and instant - from start to finish it takes less than a minute to program a new remote!

This software module requires T2 cable adaptor.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : lrtc1

HKTC1 Hyundai / Kia Software

Vehicle coverage for this module includes:

Hyundai

  • Accent (2006-11)
  • Azera (2007-11)
  • Elantra (2007-11)
  • Equus (2009-11)
  • Genesis (2008-11)
  • Grandeur (2007-11)
  • i10 (2008-2011)
  • i20 (2008-2011)
  • i30 (2008-2011)
  • i800
  • ILOAD
  • iMAX
  • Tiburon (2007-11)
  • Tuscani (2007-11)
  • Veracruz (2007-11)

Kia

  • Amanti (2007-11)
  • Borrego
  • Carens (2007-11)
  • Ceed (2007-11)
  • Picanto (2008-11)
  • Rio (2007-11)
  • Soul (2008-2011)
  • Venga (2009-11)

This software performs programming of mechanical keys into all vehicles listed above and other Kia/Hyundai models that uses CAN bus system from approx 2006-2011.

Pincode retrieval is performed on vehicles fitted with KEFICO engine ECU (I10/ I20/ picanto/ rio/ ceed etc…), for other engine ECU types, the pincode can be obtained from your usual supplier.

Software does not perform remote coding - an adapter will be produced at a later date, but alternative solutions are available. All vehicles can accept non-remote keys.

Please Note : TCS Main Interface Required

Only £195.00 + VAT
QTY :
P/No. : hktc1

HKTC2 Hyundai / Kia Software

Preliminary coverage list - may be expanded.

Hyundai

  • i30 (2012+)
  • i40 (2010+)
  • Veloster (2011+)
  • ix20 (2013+)
  • Accent (2012+)

Kia

  • Ceed (2010-2014)
  • Picanto (2012+)
  • Rio (2012+)
  • Sorento (2011+)

Software programs keys in vehicles fitted with TMS3705 ID60 80bit transponder key system. Initially manually entered pincode. Pincode reading to be added at no extra cost.

Please Note : T7 Adapter Required

Only £195.00 + VAT
QTY :
P/No. : hktc2

CTC2 Chrysler / Dodge / Jeep Software

  • 200 (2011-2014)
  • 300 - CAN 4 (Mid 2006-2007)
  • 300C (2007)
  • Aspen (2007-2009)
  • Avenger (2008-2014)
  • Caliber (2007-2012)
  • Charger (2006-2007)
  • Commander (2007)
  • Compass (2007-2017)
  • Dakota (2007-2013)
  • TRANSPONDER SYSTEM ONLY for 2006-2007 Magnum (if vehicle uses RHK)
  • Dakota / Mitsubishi Raider (2012-2013)
  • Durango (2007-2009)
  • Grand Cherokee (2007)
  • Liberty (2008-2013)
  • Magnum (2007)
  • Nitro (2007-2012)
  • Patriot (2007-2017)
  • PT Cruiser (2006-2010)
  • RAM 1500 (2006-2008)
  • RAM 1500 (2009-2011)
  • RAM 2500/3500 (2009- 2010)
  • Sebring (2007-2010)
  • Wrangler (2007-2016
Only £195.00 + VAT
QTY :
P/No. : ctc2

CVEE1 Eeprom Software (Commercial vehicles)

A software module that will allow the user to read and write the full EEPROM memory file from the body control module, by OBD, in just about one minute.

This means you no longer have to remove the body control module, desolder and manually read the EEPROM.. Once read, the file can be saved and loaded into your transponder making device of choice. The modified file that is created by the transponder can then be loaded into the body control module, again by OBD, allowing the new key and remote to directly operate without further programming.

Vehicle coverage for this module includes:

  • Citroen Relay (2006 to 2011)
  • Fiat Ducato (2006 to 2011)
  • Peugeot Boxer (2006 to 2011)
Only £195.00 + VAT
QTY :
P/No. : cvee1

Buy 6 Package Deal

For a single price, you will receive a TrueCode Smart interface cable complete with protective case and whichever six software modules you choose from our entire TrueCode range.

Shortly after purchase you will be contacted so you can let us know the modules you would like.

Only £1145.00 + VAT
QTY :
P/No. : rtc6

Buy 10 Package Deal

For a single price, you will receive a TrueCode Smart interface cable complete with protective case and whichever ten software modules you choose from our entire TrueCode range.

Shortly after purchase you will be contacted so you can let us know the modules you would like.

Only £1645.00 + VAT
QTY :
P/No. : rtc10

Full Kit

A complete package, including:

  • TCS Main Interface
  • RTC1 Renault Module
  • RTC2 Renault Module
  • RTC3 Renault Module
  • RTC4 Renault Module
  • RTC5 Renault Module
  • REE1 Renault Module
  • NTC1 Nissan Module
  • NTC2 Nissan Module
  • STC1 Suzuki Module
  • STC2 Suzuki Module
  • FTC1 Ford Module
  • FTC2 Ford Module
  • FTC3 Ford Module
  • FTC4 Ford Module
  • PSATC1 PSA Module
  • PSATC2 PSA Module
  • PSATC3 PSA Module
  • MTC1 Mazda Module
  • FATC1 Fiat Module
  • FATC2 Fiat Module
  • FATC3 Fiat Module
  • FATC4 Fiat Module
  • LRTC1 Land Rover Module
  • HKTC1 Hyundai / Kia Module
  • HKTC2 Hyundai / Kia Module
  • CTC2 Chrysler/Dodge/Jeep Module
  • CVEE1 Eeprom for Commercial Vehicles
  • GMTC1
Only £3400.00 + VAT
QTY :
P/No. : rtcfull

Adapter Cables

Type2 Adapter Cable (T2)

Works with FTC3, MTC1 and LRTC1

Only £46.00 + VAT
QTY :
P/No. : truet2

Type4 Adapter Cable (T4)

Works with PSATC1

Only £46.00 + VAT
QTY :
P/No. : truet4

Type5 Adapter Cable (T5)

Works with FATC2

Only £46.00 + VAT
QTY :
P/No. : truet5

Type7Adapter Cable (T7)

Works with HKTC2

Only £46.00 + VAT
QTY :
P/No. : truet7