Smart Dongle

One Dongle - One Solution

The innovative Smart Dongle developed for AD100Pro and MVPPro testers has many new features and benefits for the automotive locksmith. Smart Dongle is easy to use and replaces the security calculator and the current range of AD dongles with one automatic configurable dongle for all makes and models.

Previously you would need to enter the security calculator information to release the software, but this is now an automatic feature of the Smart Dongle. When using the Pro tester the correct AD dongle had to be selected for programming keys and remotes, and in some cases, multiple dongles were used when programming transponders, remotes or reading pincodes for the same vehicle.

Now, simply connect the Smart Dongle to your Pro tester and it will automatically configure itself for the vehicle it is connected to.

Additional hardware expansion ports built into the Smart Dongle allow for powerful add-on services and functionality available in the future. The Smart Dongle's on-board memory incorporates the functionality of ADC198 Nissan PIN Code Dongle including the ADC190 Hyundai / Kia PIN Code Dongle, which are available as optional software add ons.

ADC242 Smart Aerial

The Smart Aerial has been developed to be used with the Smart Dongle (ADC241) to provide locksmiths and diagnostic specialists with an ability to write pre-coding data and other information onto transponders found within the vehicle key.

In particular the Smart Aerial is able to pre-code Fiat and VAG transponders from the electronic memory of the vehicle. By reading the pre-coding stored in the vehicle and writing to a blank transponder a vehicle specific transponder can be created and programmed without delay.

Functionality

• Pre-codes ID46 & ID48 transponders
• Connects via Smart Dongle
• Requires key programmer
• Requires specific vehicle softwares
• Plug & play, automatically configures

Technical Data

• Key slot antenna frequency 125kHz
• Connection via smart dongle
• Dimensions length 185mm, width 44mm, depth 27mm.
• Weight 124g

ADC198SD

The functionality of the ADC198 Nissan pincode dongle can be added into the Smart Dongle. Please note that the ADC240 Smart Dongle is required in addition to this part.

Please note that existing owners of the ADC198 can get this functionity FREE OF CHARGE.

ADC190SD

The functionality of the ADC190 Hyundai / Kia Pincode dongle can be added into the Smart Dongle. Please note that the ADC240 Smart Dongle is required in addition to this part.

Please note that existing owners of the ADC190 can get this functionity FREE OF CHARGE.

ADC219 - VAG Instrument Reset Cable

The ADC219 VAG Instrument Reset Cable is designed for use on an "all keys lost" situation on VAG vehicles with UDS & Micronas protocol vehicles. The cable connects to the AD100Pro / MVPPro tester and the vehicle’s OBD port and is specifically used in a lost key situation for various VAG group vehicles.

The ADC219 cable is designed to be used with ADS230 Cat C software and Smart Dongle.

Full features and applications can be seen on the Spares for Key Programmmers page.